Another update
Got the body put back on
Got the floor pan in and finished up.
Got all the lights converted to 12v and wired up the truck and bed. Still need to wire up the trailer plug and trailer brake controller.
Got it plated and insured.
New headgasket seems to be sealed up good.
Fixed a valve cover gasket leak that came about from an incorrect install procedure on the upgraded head bolts that I put in.
Hooked up the Posi-lock cable on the front axle so I have 4wd now. Also the Posi-lock cable allows me to disconnect the front axle from the passenger wheel so it effectively gives me the ability to use the low range in the transfer case to achieve 2wd low range. Which is great for crawling around or backing trailers in the shed.
Have driven the truck on the road about 100 miles or so and have had no problems with it. Tires were out of balance so I took them to the tire shop to have balance beads put in them. The o-ring broke on one of the rear wheels when they took it apart so I ordered a whole new set and had to drive home on some stock ram wheels. They were only 31" and chrome vs the 37" and black on the front. Looked awful, couldn't hardly bare to be seen in it.
Anyway getting ready to order my glass kit and see about mounting some tool boxes under the bed as well as mud flaps. Maybe build a bumper for the rear. Also mount up a better seat.
Heres some pictures