Parts Link


The workhorse

User avatar

Site Admin
Site Admin

Posts: 438

Joined: Sun Nov 25, 2012 1:33 pm

Location: Clearwater, MN

Post Wed Dec 19, 2012 11:46 am

Parts Link

Post links to parts vendors using the following format.

*Part Description:
*Part Number:
*Source:
*Source Address:
*Source Web Link:
*Phone Number:
*Comments:
User avatar

Golden Jubilee
Golden Jubilee

Posts: 964

Joined: Sat Dec 01, 2012 8:06 pm

Location: Saskatchewan

Post Fri Apr 12, 2013 5:17 pm

Re: Parts Link

JimHadfield wrote:Post links to parts vendors using the following format.

*Part Description: Front wheel cylinders to fit Loadstar 1600 with the FA48 axle.
*Part Number: Right side, 37168. Left side 37167.
*Source: Napa
*Source Address:
*Source Web Link:http://www.napacanada.com/en.aspx
*Phone Number:
*Comments:

These are for the 14 x 2.5 brake drums.

Rookie
Rookie

Posts: 7

Joined: Thu Apr 24, 2014 9:37 am

Post Fri Apr 25, 2014 12:12 am

Re: Parts Link

I have several of the .pdf files for brakes, clutch, transmission, motors, etc. that I could share with members but not sure how to get them onto here. Any advice on size of file that can be posted, or would it be necessary to use a file share site and supply a link?
ie: CTS-11-IHC-L-Line Clutch_ Brakes.pdf 9.02mb - this is one of them. Perhaps there are already links to such articles?
User avatar

Golden Jubilee
Golden Jubilee

Posts: 2048

Joined: Thu Jan 24, 2013 8:49 pm

Post Sun Apr 27, 2014 4:58 pm

Re: Parts Link

Three members have sites with a variety of IH manuals...

A good size library of parts & service manuals;
https://app.box.com/shared/otkihx6yoa

Complete MT-97 R-100-160 parts manual & CTS-11/12 service manual;
http://www.hansenwebdesign.com/truck/facts_manuals.html

Complete MT-63 L-110-130 Parts manual & CTS-11 service manual;
http://nwaringa.wordpress.com/manuals/

Can you list what you have by number?
12 yrs.exp. in IH dealer parts dept.
Never argue with a fool...
If you don't have anything nice to say...say nothing.
If you don't learn something new everyday...you weren't paying attention.
THINK! Be sure brain is connected before mouth is in gear.

Rookie
Rookie

Posts: 7

Joined: Thu Apr 24, 2014 9:37 am

Post Wed Apr 30, 2014 9:21 am

Re: Parts Link

IHC Timing MarksR.jpg
392 Timing marks
Well I can list the pdf files I found on line in a very obscure site several years ago. I cannot recall the name of site where I discovered them but the site is long gone to the best of my knowledge. The files pertain to bigger trucks for the most part, like the Loadstar etc. Mind you there are a lot of similarities and usefull pictures on them. I copied the names of the files and one jpeg that I think I took of the timing marks on my 392cu.in Let me know if you need further facts or if there is a site where I can upload them to. I have looked at most of the files you listed, and these seem a bit different, though I can't say for certain that some of them are not duplicated.

Added link to access files.
app.box.com/s/l1awl6f2iux9pcziyiwr ( you must put http:// ) - before the app.box...
CTS-11-IHC RearAxel Service Manual Part 1.04
CTS-11-IHC-L-Line Clutch_ Brakes
CTS-11-IHC-L-Line Rear end
CTS-11-IHC-L-Line Service Manual Part 3
CTS-11-IHC-L-Line Service Manual Part 4
Electric shift-IHC-L-LineTwo Speed 1.06
Group 03-1 Springs
Group 04-3brakes and clutch
Group 5, steering
Group 6, Drive shafts
Group 11.0 cooling system
Group 13.1transmission
Group 14.1 ,rear axel
Group 16.2interior
Group 16.6Cab and cowl
Group 20wheels and drums
Loadstar's Specs

Pile of Parts
Pile of Parts

Posts: 39

Joined: Thu Dec 20, 2018 8:49 pm

Location: Idaho

Post Wed Jan 29, 2020 10:46 pm

Re: Parts Link

Hi everybody, in looking for a grille to for a 75 loadstar 1700 with the butterfly hood. I have three standard grille but there was an extended version that protrudes farther out. Presumably to house a larger radiator. I'm swapping a DT466 into mine and could use some extra room.

Return to Loadstar

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.