Pile of Parts
Posts: 38
Joined: Mon Mar 05, 2018 8:23 pm
Location: Atlanta, GA
Clutch Pushrod Leak at Master Cylinder
I noticed the clutch pedal engagement getting steadily lower until it was practically on the floor. Checked the master cylinder and it was super low, topped it off, then went ahead and checked for leaks but had the same issue with engagement still low. I checked out the clutch pedal push rod and found the master was leaking where it met.
Does it need to be rebuilt? Would it be the AC Delco 18g1228 Mc rebuild kit? If so do I need two kits, one for the brake side and one for the clutch side?
Is it simpler and better to upgrade to a dual MC setup? Currently on a bit of a time constraint as I closed on a house today and am supposed to be moving on Saturday.
Pictures of leak at the link below.
https://photos.app.goo.gl/KLL6ojva8eEfNsrF7
1987 Subaru RX-Turbo
2017 Subaru WRX