1966 1100A Tie Rod Ends


Rookie
Rookie

Posts: 3

Joined: Thu Oct 10, 2013 3:54 pm

Post Tue Nov 19, 2013 3:44 pm

1966 1100A Tie Rod Ends

I'm working on a 1966 IH 4 door pick up truck with a 304.
It is 4wd and has power steering.

I ordered two tie rods from rockauto that are the wrong size.
The main shaft is a bit smaller and the taper is a bit to big.

I just need the part numbers for the smaller taper tie rod ends.

Thanks for your help.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 2048

Joined: Thu Jan 24, 2013 8:49 pm

Post Wed Nov 20, 2013 3:49 am

Re: 1966 1100A Tie Rod Ends

What are the part numbers you got from RA?

I looked them up in the IH parts manual (MT-118) the 1100A,B & C + 1200A,B & C w/FA15 front axle all used the same ENDS.
This is exactly how they're listed...
153771R91 End,w/dust cover & spring,Left tie rod
153772R91 End,w/dust cover & spring,Right tie rod

Did a web search and got good results. 8-)

I'll post these since they have other brands listed,I checked most of the aftermarket #'s and all checked out as good cross ref's.

153771R91
http://www.oehq.com/oeparts_ACD45A0016.htm

153772R91
http://www.oehq.com/oeparts_ACD45A0017.htm

I'm sure you can get them locally with all those PN's,that way you can match them up with the old ones at the counter.

Btw.This should have been posted in the A,B,C section. I very rarely look here,ibesq told me about it.
12 yrs.exp. in IH dealer parts dept.
Never argue with a fool...
If you don't have anything nice to say...say nothing.
If you don't learn something new everyday...you weren't paying attention.
THINK! Be sure brain is connected before mouth is in gear.

Return to A, B, C and D Series

Who is online

Users browsing this forum: No registered users and 3 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.