More BD240 Parts Questions....


Rusty Driver
Rusty Driver

Posts: 147

Joined: Thu Aug 08, 2019 8:14 am

Location: Rostraver, Pennsylvania

Post Mon May 11, 2020 3:54 pm

More BD240 Parts Questions....

I hope you guys aren't getting tired of all my questions....
Does anyone know a source for top end parts? I am having no luck through my usual suppliers. This is a tilt valve head, and I cannot find valve keepers for the exhaust valves. They are small, circular keepers, in two halfs. I see the intake valve keepers seem available, but haven't been able to find the ones for the exhaust side. The exhaust valves also have a cup on the top of them, where the rocker arm rides. I am guessing that this is all to allow the exhaust valves to rotate. I can't find these cups either. Valve springs are a problem also. I think I will be able to find lifters from what I am seeing online.
Do you guys happen to have any recommended sources for parts like this?

84 482 R1 Ex. Valve Cup

84 484 R3 Ex. Valve Keeper

76 954 R1 Valve Spring

As always, thank you for your help!

Bryon
User avatar

Golden Jubilee
Golden Jubilee

Posts: 530

Joined: Sat Dec 01, 2012 9:55 am

Post Mon May 11, 2020 4:45 pm

Re: More BD240 Parts Questions....

You should be able to find those parts through a Google search. Take out any spaces between numbers. Hang on to what you have though, just in case.

Rusty Driver
Rusty Driver

Posts: 147

Joined: Thu Aug 08, 2019 8:14 am

Location: Rostraver, Pennsylvania

Post Mon May 11, 2020 5:11 pm

Re: More BD240 Parts Questions....

Hi Paul,

I've tried that too, but am coming up empty.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 530

Joined: Sat Dec 01, 2012 9:55 am

Post Mon May 11, 2020 7:57 pm

Re: More BD240 Parts Questions....

For valve springs, take a look at VS295 Sealed Power. For keepers and cups, I'd check with a local Case IH dealer, since the head was used on tractors, combines and cotton pickers. And maybe Egge.com. And I'd bet the machine shop might have some sources as well.

Rusty Driver
Rusty Driver

Posts: 147

Joined: Thu Aug 08, 2019 8:14 am

Location: Rostraver, Pennsylvania

Post Thu May 14, 2020 9:32 am

Re: More BD240 Parts Questions....

Hi Paul,

I have got the valve springs, lifters, and the ex. valve cups can be dressed out per the machine shop, so I think I am looking OK. All I need to find are these **** ex. valve keepers. I'll try some Case / IH dealers like you recommended. Keeping my fingers crossed.... I'll let you know what I find out. Thanks!

Return to A, B, C and D Series

Who is online

Users browsing this forum: No registered users and 3 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.