A112 Carrier Bearing


Rusty Driver
Rusty Driver

Posts: 147

Joined: Thu Aug 08, 2019 8:14 am

Location: Rostraver, Pennsylvania

Post Sun Sep 01, 2019 11:25 am

A112 Carrier Bearing

Hi all,
I'm trying to find info on the driveshaft carrier bearing on our 1959 A112. It has the numbers 88107BYY on the bearing, and 881079YY on the rubber isolater it sits in. Its incased in the housing in the attached pics. Everything I look up looks totally different. I'm thinking I can reuse the housing if I can at least find a new bearing...Any thoughts or help is greatly appreciated!
Attachments
Screenshot_20190901-122430_Gallery.jpg

Golden Jubilee
Golden Jubilee

Posts: 1438

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Tue Sep 03, 2019 8:24 am

Re: A112 Carrier Bearing

I don't know if this will work or not, I have some NOS units and cannot find these part numbers. These are 1 piece units in IH boxes.
"PN" 223572R93, the ID is 1-3/8 inch, the rubber is 4 inches.

"PN" 879849R92, the ID is 1-3/4 inch, the OD is 4-3/8 inches.
I will post a pic soon.
Attachments
DRIVESHAFT SUPPORT.jpg

Rusty Driver
Rusty Driver

Posts: 147

Joined: Thu Aug 08, 2019 8:14 am

Location: Rostraver, Pennsylvania

Post Tue Sep 03, 2019 10:09 am

Re: A112 Carrier Bearing

Thanks!
I'll look into these numbers as well and see what I can find.

Bryon

Golden Jubilee
Golden Jubilee

Posts: 1438

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Tue Sep 03, 2019 1:32 pm

Re: A112 Carrier Bearing

Bryon, Measure with a caliper you would be good to go if it will fit, I sold one of these units to a f--d guy it bolted in.

Rusty Driver
Rusty Driver

Posts: 147

Joined: Thu Aug 08, 2019 8:14 am

Location: Rostraver, Pennsylvania

Post Fri Sep 06, 2019 8:32 am

Re: A112 Carrier Bearing

Thanks Kevin.
I'll let you know.

Bryon

Return to A, B, C and D Series

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.