1964 AB110 door pins

Hi Guys , I have a problem with the door hinge pins on the drivers side . Figured I might as well do both doors at the same time . does anyone know if there is a door hinge pin kit available ?
thanks
Jeff

Check with some of the vendors on this or other IHC websites for hinge pins. They quite often have stuff that surprises me.
Chris

I think spikedog makes pins, mirrors, brackets and such.

I do not think he has been on yet, if someone has his personal contact, perhaps they can either post up or get a hold of him to get re-signed up. Thank you.

Lloyd

Not sayin its the best way but I just used a bolt of the correct dimensions to replace one of the seized up door pins on my B110 when it twisted off. More years ago than I care to think about so it must have been a good bolt.

I had some made for our A 120 as they were toast. Not sure if they are the same for yours but if you PM me with the length and mic the OD i can check the extras we had made. Anytime we get machining done I get extras made as the money is in the set up time. That said, anyone need bushings for a Ross steering box let me know.

Thanks guys , end up having to take the hinges in to a machine shop as the broken pins had become one with the hinge and no amount of hammer and punch would remove them . The machine shop is going to make new pins to fit . Coming back with next problem No 2 . Somebody decided they needed my indicator lense and surround more than I did . Is there somewhere over their where I can get one or both? I will post a photo to help .
Thanks
Jeff

Jeff here guys, this is my truck and these are the indicators.

Not totally sure, but they look similar to the markers on the B series- no repop that I know of, you're pretty much stuck with trolling ebay or junkyards for them. Where are you located? there's a junkyard in Sunnyside WA with a pair of B series in it.

I Think Jeff is in New Zealand, but I could be mistaken. If he is, this may be a case of help a fellow binder owner out by "purchase, here and Ship to there" much like I have done for Jorge in Brazil.

Lloyd