Truck Tire

I have aquired a 7.50" x 20" Split Rim tire and Rim for a truck. The Bolt pattern is 6 big holes on about a 8.75" bolt circle and the regular dished stlye rim like would be used on front or with dual tires. Would this be for an International truck or other??? I have Chevy and Model AA Ford and they are not 6 hole. Thanks in advance.
Cleddy

for the smaller internationals, that would be a 6 on 7 1/4 bolt spacing. I will have to measure one of the ones off the L150 I had, but I think it is the same.

I believe that is the common 6 lug "Budd" used on the -6and-7 K series and many others, still made in that bolt pattern.
The big question is: lock ring or Firestone RH 5deg semi drop center? If the later then scrap it, if the former then it is ok.

It is the one with the ring around the center on the inside of the rim. I am not familiar with that even though the big Chevy truck is that way. It sounds like it may be an International Rim & tire which at present have no use for. The old 7.5-20" tires are getting harder to find though. Thanks for the info. Cleddy

Sound more like a Firestone RH to me, I would junk it if it was. Lock ring wheels are easy to tell, the lock ring is at one of the outer edges of the rim.
IHC never put a Firestone RH 5 deg wheel on originally.