OldIHC

Archive for the ‘IHC Vendors’ Category

This page is dedicated to reproduction parts manufactured by members of OldIHC.org.  The page is organized alphabetically by the last name of the member.  If you have any updates or would like to get your parts added, contact John (Jupes) Hansen.

—–

Eric Hutton (Eric’s49KB1)

I have available the tabbed locking rear axle washers used on the following model trucks:
C and D from the 30′s
K-1 to 5, KB-1 to 5
L110, R110, S110

I also have the locks used on the rear “U” joint. They fit the K and KB 1-3 and some others. (still figuring out others they were used on).

All parts are sold at cost plus shipping (just helping keep these trucks on the road).

Click HERE to open my drawings (with dimensions). The drawing can be zoomed and panned once opened.

Contact: Eric Hutton
Trenton, Ontario

—–

Conrad Lanoue (Spikedog)

Click to View Larger Image

I now have 12 gauge 304 stainless steel hinge pin mirror assemblies available for the D series and KB 6 and larger IH trucks.  The assembly is an exact replica of the original IH and includes the two part bracket, an adjustable stainless mirror arm ( 14″ – 22″), a stainless 5″ mirror head, a new stainless 9/32″ hinge pin with locknut, and all stainless hardware with nylon spacers. The crimped ends on the mirror arms are silver soldered to prevent water from getting in, and the parts are all glass beaded with a finish that can be polished, painted, or powder coated.  The bracket can be mounted on either door. The cost for each assembly is $95.00 + shipping.  I make all the parts except the mirror head here in my shop in Vermont.

Click to View larger Image

I now have 12 gauge 304 stainless steel hinge pin mirror assemblies available for the KB 1-5 series IH trucks.  The assembly is an exact replica of the original IH and includes the bracket with mirror arm, a stainless 5″ mirror head, and a new stainless 5/16″ hinge pin. The crimped end of the mirror arm is silver soldered to prevent water from getting in, and the arm is silver soldered into the bracket. All the parts are glass beaded with a finish that can be polished, painted, or powder coated. There is a left and a right bracket, and they are not interchangeable. The cost for each assembly is $95.00 + shipping.  I make all the parts except the mirror head here in my shop in Vermont.

Click to View Larger Image

I now have 12 gauge 304 stainless steel hinge pin mirror assemblies available for the R, L, & S series IH trucks.  The assembly is an exact replica of the original IH and includes the two part bracket, an adjustable stainless mirror arm ( 14″ – 22″), a stainless 5″ mirror head, a new stainless 11/32″ hinge pin with locknut, and all stainless hardware with nylon spacers. The crimped ends on the mirror arms are silver soldered to prevent water from getting in, and the parts are all glass beaded with a finish that can be polished, painted, or powder coated.  The bracket can be mounted on either door. The cost for each assembly is $95.00 + shipping.  I make all the parts except the mirror head here in my shop in Vermont.

Click to View Larger Image

I am pleased to offer for sale new reproduction 304 stainless steel center grille strips for the KB 1-5 series trucks.  These center grille strips are exact replicas of the original IH, and the material I used with the new batch is polished as opposed to the mill finish on the original batch I offered for sale.  I make these grille strips here in my shop in Vermont, and although the new material is polished to about 90% of show quality,  there will still be minor blemishes and tool marks in the stainless that can be removed with more buffing.   Each strip is $70.00 plus shipping.  The attached picture shows a professionally polished strip on the top, and the quality of the strip I am offering for sale on the bottom.

Contact: Conrad Lanoue
Jacksonville, Vermont

—–

Custom Wire Harnesses
http://www.cypressindustries.com/custom_wire_harnesses.html
Wire harness assembler manufacturing custom wire harnesses, wire harness design and wire harnesses

Jacob Chapin developed several stainless and aluminum parts for his KB-1. Jacob is now making his custom parts available to others. I invite you to look at his pages http://oldihc.org/users/jacob/

Maybe you’re already aware………

Maybe this one is old news but just in case it’s not, I’ll post a link:
http://www.rockauto.com/catalog/raframecatalog.php?a=G-partdescribe2

They’ve got quite few parts that I’d been unable to find elsewhere; parts such as:

Belt Drive
Brake/Wheel Hub
Clutch
Cooling System
Drivetrain
Engine
Exhaust
Fuel/Air
Ignition
Transmission-Manual

The site is vehicle specific so the parts are easy to look up.
Bill